Riton Optics first caught my attention at SHOT Show 2025. I spent some time with them, and they kindly provided me with four test optics. All four impressed me, so I made certain to visit Riton again in 2026.
2025 was an introduction to the company. 2026 saw me focused on new products, and Riton sent me one of their new 3 Tactix MPRD XL pistol green dots, which I’ve been running for about a month now.
The MPRD XL excited me because I already run the Riton 3 Tactix MPRD 3 red dot on my everyday carry gun. The XL model offers a larger objective window and a green dot, which I prefer. In fact, the MPRD XL’s reticle is only available in green. Being familiar with the MPRD 3 gave me a head start on evaluating the XL, so I think I have a good handle on it. Let’s begin with the specifications.
Riton 3 Tactix MPRD XL Specifications
- Objective Lens Diameter: 24mm x 17mm
- Reticle: User-Selected 2 MOA Dot; 30 MOA Circle; or Dot within Circle
- Reticle Color: Green
- Height: 1.04 inches (26.4mm)
- Width: 1.08 inches (27.4mm)
- Weight: 1.2 ounces (34.02 grams)
- Construction: 7075-T6 Aircraft-Grade Aluminum Alloy
- IPX67 Waterproof Rated
- Footprint: Shield RMSc
- Power Source: 1 CR1632 Battery (Included)
- Battery Life: 50,000 Hours
Riton 3 Tactix MPRD XL Features
I’m already familiar with the MPRD 3 on my Sig Sauer P365XL, so I decided to test the MPRD XL on the same gun for a direct comparison.
The MPRD XL’s main selling point is the enlarged objective window, which is 3mm wider and 0.6mm taller than the MPRD 3. The larger window does slightly increase the optic’s overall dimensions compared to the MPRD 3, adding 0.02 inches of height, 0.06 inches of width, and 0.08 ounces of weight.
The green reticle is also a big feature, since we know that the human eye processes green wavelengths more efficiently than red. I was, however, surprised that Riton doesn’t offer a red reticle. But Riton isn’t the only company doing that, so perhaps we’re seeing the beginning of a trend.
The reticle itself allows the user to select a simple 2 MOA dot, a 30 MOA circle, or the dot within the circle. The circle has reference points at each cardinal direction. The reticle is motion-activated to save battery life.
The MPRD XL has 10 brightness settings, with levels 1 and 2 being night vision compatible. Two arrow buttons on the unit’s left side control the brightness. They are tactile and audible, though they are fairly small. The right-side-mounted tray provides easy access to the CR1632 battery, one of which ships with the optic.
The 7075-T6 construction makes the MPRD XL rugged and durable, while the beveled corners ensure against snags while drawing or holstering. The machined rear sight notch allows easy use of iron sights through the window if necessary. The Shield RMSc footprint ensures wide compatibility, and I was able to mount the MPRD XL directly onto my Sig.
Running the Riton 3 Tactix MPRD XL
I immediately noticed the larger window, especially the extra 3mm of width. The MPRD 3 has been great for me, but I seem to acquire targets a bit more easily in transition with the MPRD XL. The slightly larger housing dimensions are not noticeable and, for me, are well worth the very minimal trade-off. You can see the slight extra width by looking down the slide, but it doesn’t affect my holstering or anything else.
The MPRD 3 has been a fantastic optic on my carry gun, always holding zero, with a nice, big, visible reticle that I acquire instinctively. The MPRD XL is no different, except the window is a bit larger and the reticle is green. I see both of those as improvements.
I’ve run the MPRD XL through my normal drills, plus extra drawing and holstering, and it has performed admirably. Honestly, the Riton multi-reticle is my favorite handgun reticle, and has been since I first experienced it. And I like it even better now that it’s green.
I’ve begun doing drop tests on optics I review. I dropped the unloaded Sig five times from shoulder height onto my pistol range’s gravel floor. Directly onto the optic. I’m happy to report that the MPRD XL held zero afterward, and the finish wasn’t even marred. I just had to clear off some dust.
My only small complaint regarding the MPRD XL is the small buttons for the brightness settings. They are smaller than the MPRD 3’s, no doubt to make room for the larger window. The buttons operate perfectly. They are tactile and audible. Riton says they are “the perfect size,” even with gloves, but that wasn’t my experience. I can operate them fine with my fingers, but, for me, they’re a bit too small with gloves.
Final Thoughts
The Riton 3 Tactix MPRD XL is a great little optic. It does everything I want my concealed carry optic to do. I deliberately elected to run the MPRD 3 on my EDC gun and never regretted it. But the MPRD XL’s larger window and green reticle make it a little better. So, my Sig now has a new optic. But I’ll stress that the MPRD 3 will certainly find its way to another slim handgun rather than be consigned to the gear closet.
My complaint about the small buttons is negligible in light of the MPRD XL’s positives. I preset my brightness level anyway, and almost never have to adjust it. This optic met my expectations, which were already high thanks to my previous experience with Riton.
My job provides me access to a wide array of optics from numerous brands. I like many of them, even though I’m a late convert to pistol optics. I’ve chosen a Riton MPRD for my EDC gun twice now: the MPRD 3 and, most recently, the MPRD XL. The reticle is a big part of those choices. But the quality and performance are also there. After all, the best reticle on an unreliable optic isn’t going to cut it.
Riton optics have always performed for me. The MPRD XL is doing the same. And the value is also there. The MPRD XL’s MSRP is $329.99. You really get a lot for your money. Riton is a rising brand in an ever-more crowded optic market. We have more choices now than ever. In my experience, Riton, and the MPRD XL, deserve a hard look.
